Struct esp_idf_hal::sys::wifi_ap_config_t

#[repr(C)]
pub struct wifi_ap_config_t {
    pub ssid: [u8; 32],
    pub password: [u8; 64],
    pub ssid_len: u8,
    pub channel: u8,
    pub authmode: u32,
    pub ssid_hidden: u8,
    pub max_connection: u8,
    pub beacon_interval: u16,
    pub pairwise_cipher: u32,
    pub ftm_responder: bool,
    pub pmf_cfg: wifi_pmf_config_t,
    pub sae_pwe_h2e: u32,
}

@brief Soft-AP configuration settings for the device

Fields

ssid: [u8; 32]

< SSID of soft-AP. If ssid_len field is 0, this must be a Null terminated string. Otherwise, length is set according to ssid_len.

password: [u8; 64]

< Password of soft-AP.

ssid_len: u8

< Optional length of SSID field.

channel: u8

< Channel of soft-AP

authmode: u32

< Auth mode of soft-AP. Do not support AUTH_WEP, AUTH_WAPI_PSK and AUTH_OWE in soft-AP mode. When the auth mode is set to WPA2_PSK, WPA2_WPA3_PSK or WPA3_PSK, the pairwise cipher will be overwritten with WIFI_CIPHER_TYPE_CCMP.

ssid_hidden: u8

< Broadcast SSID or not, default 0, broadcast the SSID

max_connection: u8

< Max number of stations allowed to connect in

beacon_interval: u16

< Beacon interval which should be multiples of 100. Unit: TU(time unit, 1 TU = 1024 us). Range: 100 ~ 60000. Default value: 100

pairwise_cipher: u32

< Pairwise cipher of SoftAP, group cipher will be derived using this. Cipher values are valid starting from WIFI_CIPHER_TYPE_TKIP, enum values before that will be considered as invalid and default cipher suites(TKIP+CCMP) will be used. Valid cipher suites in softAP mode are WIFI_CIPHER_TYPE_TKIP, WIFI_CIPHER_TYPE_CCMP and WIFI_CIPHER_TYPE_TKIP_CCMP.

ftm_responder: bool

< Enable FTM Responder mode

pmf_cfg: wifi_pmf_config_t

< Configuration for Protected Management Frame

sae_pwe_h2e: u32

< Configuration for SAE PWE derivation method

Trait Implementations

impl Clone for wifi_ap_config_t

fn clone(&self) -> wifi_ap_config_t

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for wifi_ap_config_t

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for wifi_ap_config_t

fn default() -> wifi_ap_config_t

Returns the “default value” for a type.

impl Copy for wifi_ap_config_t