Crate esp_idf_hal

source ·


  • CAN bus peripheral control.
  • Delay providers.
  • GPIO and pin configuration
  • Driver for the Inter-IC Sound (I2S) peripheral(s).
  • Error types
  • LED Control peripheral (which also creates PWM signals for other purposes)
  • The prelude.
  • Reset reasons
  • Remote Control (RMT) module driver.
  • ESP ROM libraries
  • SPI peripheral control
  • Controls UART peripherals (UART0, UART1, UART2). Notice that UART0 is typically already used for loading firmware and logging. Therefore use UART1 and UART2 in your application. Any pin can be used for rx and tx.
  • Units of measurement implementation for times and frequencies.