Struct esp_idf_svc::sys::i2s_driver_config_t

#[repr(C)]
pub struct i2s_driver_config_t {

    pub mode: u32,
    pub sample_rate: u32,
    pub bits_per_sample: u32,
    pub channel_format: u32,
    pub communication_format: u32,
    pub intr_alloc_flags: i32,
    pub __bindgen_anon_1: i2s_driver_config_t__bindgen_ty_1,
    pub __bindgen_anon_2: i2s_driver_config_t__bindgen_ty_2,
    pub use_apll: bool,
    pub tx_desc_auto_clear: bool,
    pub fixed_mclk: i32,
    pub mclk_multiple: u32,
    pub bits_per_chan: u32,
    pub chan_mask: i32,
    pub total_chan: u32,
    pub left_align: bool,
    pub big_edin: bool,
    pub bit_order_msb: bool,
    pub skip_msk: bool,
}

@brief I2S driver configuration parameters

Fields

mode: u32

< I2S work mode

sample_rate: u32

< I2S sample rate

bits_per_sample: u32

< I2S sample bits in one channel

channel_format: u32

< I2S channel format.

communication_format: u32

< I2S communication format

intr_alloc_flags: i32

< Flags used to allocate the interrupt. One or multiple (ORred) ESP_INTR_FLAG_* values. See esp_intr_alloc.h for more info

__bindgen_anon_1: i2s_driver_config_t__bindgen_ty_1

__bindgen_anon_2: i2s_driver_config_t__bindgen_ty_2

use_apll: bool

< I2S using APLL as main I2S clock, enable it to get accurate clock

tx_desc_auto_clear: bool

< I2S auto clear tx descriptor if there is underflow condition (helps in avoiding noise in case of data unavailability)

fixed_mclk: i32

< I2S using fixed MCLK output. If use_apll = true and fixed_mclk > 0, then the clock output for i2s is fixed and equal to the fixed_mclk value. If fixed_mclk set, mclk_multiple won’t take effect

mclk_multiple: u32

< The multiple of I2S master clock(MCLK) to sample rate

bits_per_chan: u32

< I2S total bits in one channel， only take effect when larger than ‘bits_per_sample’, default ‘0’ means equal to ‘bits_per_sample’

chan_mask: i32

< I2S active channel bit mask, set value in i2s_channel_t to enable specific channel, the bit map of active channel can not exceed (0x1<<total_chan).

total_chan: u32

< I2S Total number of channels. If it is smaller than the biggest active channel number, it will be set to this number automatically.

left_align: bool

< Set to enable left alignment

big_edin: bool

< Set to enable big endian

bit_order_msb: bool

< Set to enable msb order

skip_msk: bool

< Set to enable skip mask. If it is enabled, only the data of the enabled channels will be sent, otherwise all data stored in DMA TX buffer will be sent

Trait Implementations

impl Clone for i2s_driver_config_t

fn clone(&self) -> i2s_driver_config_t

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for i2s_driver_config_t

fn default() -> i2s_driver_config_t

Returns the “default value” for a type.

impl Copy for i2s_driver_config_t