Struct embedded_svc::ipv4::SocketAddrV4

1.0.0 ·
pub struct SocketAddrV4 { /* private fields */ }
Expand description

For backwards compatibility. Might be removed in future versions. An IPv4 socket address.

IPv4 socket addresses consist of an IPv4 address and a 16-bit port number, as stated in IETF RFC 793.

See SocketAddr for a type encompassing both IPv4 and IPv6 socket addresses.

The size of a SocketAddrV4 struct may vary depending on the target operating system. Do not assume that this type has the same memory layout as the underlying system representation.

§Examples

use std::net::{Ipv4Addr, SocketAddrV4};

let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);

assert_eq!("127.0.0.1:8080".parse(), Ok(socket));
assert_eq!(socket.ip(), &Ipv4Addr::new(127, 0, 0, 1));
assert_eq!(socket.port(), 8080);

Implementations§

§

impl SocketAddrV4

pub fn parse_ascii(b: &[u8]) -> Result<SocketAddrV4, AddrParseError>

🔬This is a nightly-only experimental API. (addr_parse_ascii)

Parse an IPv4 socket address from a slice of bytes.

#![feature(addr_parse_ascii)]

use std::net::{Ipv4Addr, SocketAddrV4};

let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);

assert_eq!(SocketAddrV4::parse_ascii(b"127.0.0.1:8080"), Ok(socket));
§

impl SocketAddrV4

1.0.0 (const: 1.69.0)

pub const fn new(ip: Ipv4Addr, port: u16) -> SocketAddrV4

Creates a new socket address from an IPv4 address and a port number.

§Examples
use std::net::{SocketAddrV4, Ipv4Addr};

let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);
1.0.0 (const: 1.69.0)

pub const fn ip(&self) -> &Ipv4Addr

Returns the IP address associated with this socket address.

§Examples
use std::net::{SocketAddrV4, Ipv4Addr};

let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);
assert_eq!(socket.ip(), &Ipv4Addr::new(127, 0, 0, 1));
1.9.0

pub fn set_ip(&mut self, new_ip: Ipv4Addr)

Changes the IP address associated with this socket address.

§Examples
use std::net::{SocketAddrV4, Ipv4Addr};

let mut socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);
socket.set_ip(Ipv4Addr::new(192, 168, 0, 1));
assert_eq!(socket.ip(), &Ipv4Addr::new(192, 168, 0, 1));
1.0.0 (const: 1.69.0)

pub const fn port(&self) -> u16

Returns the port number associated with this socket address.

§Examples
use std::net::{SocketAddrV4, Ipv4Addr};

let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);
assert_eq!(socket.port(), 8080);
1.9.0

pub fn set_port(&mut self, new_port: u16)

Changes the port number associated with this socket address.

§Examples
use std::net::{SocketAddrV4, Ipv4Addr};

let mut socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);
socket.set_port(4242);
assert_eq!(socket.port(), 4242);

Trait Implementations§

1.0.0§

impl Clone for SocketAddrV4

§

fn clone(&self) -> SocketAddrV4

Returns a copy of the value. Read more
1.0.0§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
1.0.0§

impl Debug for SocketAddrV4

§

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
1.0.0§

impl Display for SocketAddrV4

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
1.16.0§

impl From<SocketAddrV4> for SocketAddr

§

fn from(sock4: SocketAddrV4) -> SocketAddr

Converts a SocketAddrV4 into a SocketAddr::V4.

1.5.0§

impl FromStr for SocketAddrV4

§

type Err = AddrParseError

The associated error which can be returned from parsing.
§

fn from_str(s: &str) -> Result<SocketAddrV4, AddrParseError>

Parses a string s to return a value of this type. Read more
1.0.0§

impl Hash for SocketAddrV4

§

fn hash<__H>(&self, state: &mut __H)
where __H: Hasher,

Feeds this value into the given [Hasher]. Read more
1.3.0§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given [Hasher]. Read more
1.0.0§

impl Ord for SocketAddrV4

§

fn cmp(&self, other: &SocketAddrV4) -> Ordering

This method returns an [Ordering] between self and other. Read more
1.21.0§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
1.0.0§

impl PartialEq for SocketAddrV4

§

fn eq(&self, other: &SocketAddrV4) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.0.0§

impl PartialOrd for SocketAddrV4

§

fn partial_cmp(&self, other: &SocketAddrV4) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.0.0§

impl ToSocketAddrs for SocketAddrV4

§

type Iter = IntoIter<SocketAddr>

Returned iterator over socket addresses which this type may correspond to.
§

fn to_socket_addrs(&self) -> Result<IntoIter<SocketAddr>, Error>

Converts this object to an iterator of resolved SocketAddrs. Read more
1.0.0§

impl Copy for SocketAddrV4

1.0.0§

impl Eq for SocketAddrV4

1.0.0§

impl StructuralPartialEq for SocketAddrV4

Auto Trait Implementations§

§

impl Freeze for SocketAddrV4

§

impl RefUnwindSafe for SocketAddrV4

§

impl Send for SocketAddrV4

§

impl Sync for SocketAddrV4

§

impl Unpin for SocketAddrV4

§

impl UnwindSafe for SocketAddrV4

Blanket Implementations§

§

impl<T> Any for T
where T: 'static + ?Sized,

§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<T> Borrow<T> for T
where T: ?Sized,

§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
§

impl<T> BorrowMut<T> for T
where T: ?Sized,

§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> CloneToUninit for T
where T: Clone,

§

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
§

impl<T> CloneToUninit for T
where T: Copy,

§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
§

impl<T> From<T> for T

§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T, U> Into<U> for T
where U: From<T>,

§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of [From]<T> for U chooses to do.

§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<T> ToString for T
where T: Display + ?Sized,

§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.