Enum embedded_hal_async::i2c::ErrorKind

source ·
#[non_exhaustive]
pub enum ErrorKind { Bus, ArbitrationLoss, NoAcknowledge(NoAcknowledgeSource), Overrun, Other, }
Expand description

I2C error kind.

This represents a common set of I2C operation errors. HAL implementations are free to define more specific or additional error types. However, by providing a mapping to these common I2C errors, generic code can still react to them.

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive
Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.
§

Bus

Bus error occurred. e.g. A START or a STOP condition is detected and is not located after a multiple of 9 SCL clock pulses.

§

ArbitrationLoss

The arbitration was lost, e.g. electrical problems with the clock signal.

§

NoAcknowledge(NoAcknowledgeSource)

A bus operation was not acknowledged, e.g. due to the addressed device not being available on the bus or the device not being ready to process requests at the moment.

§

Overrun

The peripheral receive buffer was overrun.

§

Other

A different error occurred. The original error may contain more information.

Trait Implementations§

source§

impl Clone for ErrorKind

source§

fn clone(&self) -> ErrorKind

Returns a copy of the value. Read more
1.0.0§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for ErrorKind

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl Display for ErrorKind

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl Error for ErrorKind

source§

fn kind(&self) -> ErrorKind

Convert error to a generic I2C error kind. Read more
source§

impl Hash for ErrorKind

source§

fn hash<__H>(&self, state: &mut __H)
where __H: Hasher,

Feeds this value into the given [Hasher]. Read more
1.3.0§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given [Hasher]. Read more
source§

impl Ord for ErrorKind

source§

fn cmp(&self, other: &ErrorKind) -> Ordering

This method returns an [Ordering] between self and other. Read more
1.21.0§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
source§

impl PartialEq for ErrorKind

source§

fn eq(&self, other: &ErrorKind) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd for ErrorKind

source§

fn partial_cmp(&self, other: &ErrorKind) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl Copy for ErrorKind

source§

impl Eq for ErrorKind

source§

impl StructuralPartialEq for ErrorKind

Auto Trait Implementations§

§

impl Freeze for ErrorKind

§

impl RefUnwindSafe for ErrorKind

§

impl Send for ErrorKind

§

impl Sync for ErrorKind

§

impl Unpin for ErrorKind

§

impl UnwindSafe for ErrorKind

Blanket Implementations§

§

impl<T> Any for T
where T: 'static + ?Sized,

§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<T> Borrow<T> for T
where T: ?Sized,

§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
§

impl<T> BorrowMut<T> for T
where T: ?Sized,

§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> CloneToUninit for T
where T: Clone,

§

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
§

impl<T> CloneToUninit for T
where T: Copy,

§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
§

impl<T> From<T> for T

§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T, U> Into<U> for T
where U: From<T>,

§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of [From]<T> for U chooses to do.

§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.