Struct esp_idf_svc::hal::sys::esp_ble_adv_data_t

#[repr(C)]
pub struct esp_ble_adv_data_t {

    pub set_scan_rsp: bool,
    pub include_name: bool,
    pub include_txpower: bool,
    pub min_interval: i32,
    pub max_interval: i32,
    pub appearance: i32,
    pub manufacturer_len: u16,
    pub p_manufacturer_data: *mut u8,
    pub service_data_len: u16,
    pub p_service_data: *mut u8,
    pub service_uuid_len: u16,
    pub p_service_uuid: *mut u8,
    pub flag: u8,
}

Advertising data content, according to “Supplement to the Bluetooth Core Specification”

Fields

set_scan_rsp: bool

< Set this advertising data as scan response or not

include_name: bool

< Advertising data include device name or not

include_txpower: bool

< Advertising data include TX power

min_interval: i32

< Advertising data show slave preferred connection min interval. The connection interval in the following manner: connIntervalmin = Conn_Interval_Min * 1.25 ms Conn_Interval_Min range: 0x0006 to 0x0C80 Value of 0xFFFF indicates no specific minimum. Values not defined above are reserved for future use.

max_interval: i32

< Advertising data show slave preferred connection max interval. The connection interval in the following manner: connIntervalmax = Conn_Interval_Max * 1.25 ms Conn_Interval_Max range: 0x0006 to 0x0C80 Conn_Interval_Max shall be equal to or greater than the Conn_Interval_Min. Value of 0xFFFF indicates no specific maximum. Values not defined above are reserved for future use.

appearance: i32

< External appearance of device

manufacturer_len: u16

< Manufacturer data length

p_manufacturer_data: *mut u8

< Manufacturer data point

service_data_len: u16

< Service data length

p_service_data: *mut u8

< Service data point

service_uuid_len: u16

< Service uuid length

p_service_uuid: *mut u8

< Service uuid array point

flag: u8

< Advertising flag of discovery mode, see BLE_ADV_DATA_FLAG detail

Trait Implementations

impl Clone for esp_ble_adv_data_t

fn clone(&self) -> esp_ble_adv_data_t

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for esp_ble_adv_data_t

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for esp_ble_adv_data_t

fn default() -> esp_ble_adv_data_t

Returns the “default value” for a type.

impl Copy for esp_ble_adv_data_t