Function esp_rom_route_intr_matrix

pub unsafe extern "C" fn esp_rom_route_intr_matrix(
    cpu_core: i32,
    periph_intr_id: u32,
    cpu_intr_num: u32,
)

@brief Route peripheral interrupt sources to CPU’s interrupt port by matrix

Usually there’re 4 steps to use an interrupt:

1. Route peripheral interrupt source to CPU. e.g. esp_rom_route_intr_matrix(0, ETS_WIFI_MAC_INTR_SOURCE, ETS_WMAC_INUM)
2. Set interrupt handler for CPU
3. Enable CPU interrupt
4. Enable peripheral interrupt

@param cpu_core The CPU number, which the peripheral interrupt will inform to @param periph_intr_id The peripheral interrupt source number @param cpu_intr_num The CPU (external) interrupt number. On targets that use CLIC as their interrupt controller, this number represents the external interrupt number. For example, passing cpu_intr_num = i to this function would in fact bind peripheral source to CPU interrupt CLIC_EXT_INTR_NUM_OFFSET + i.